TSI Environmental DustTrak - Outdoor Dust/Aerosol Monitor - available for rental, hire and purchase from Ashtead Technology.
Available to rent, hire or purchase from Ashtead Technology, the TSI Environmental DUSTTRAK Aerosol Monitor. Built upon proven DustTrak technology, the Environmental DustTrak Monitor allows you to remotely monitor dust and aerosols in an outdoor environment.
Suitable for long-term monitoring, the Environmental DustTrak Photometer is housed in a weather-proof, lockable enclosure and utilises a cloud based management system which provides you with real-time data measurements from any location. To ensure effective management, you can also set up custom text message and email alerts.
The EDTDRX model (which is available for rental) is able to measure simultaneous PMTotal, PM10, PM2.5 and PM1.0 mass fractions, has a concentration range of 0-150mg/m3 and a resolution of ±0.1% of reading or 0.001 mg/m3, whichever is greater. Other models, including the EDTPM10 and EDTPM2.5 are available for purchase.
The TSI Environmental DustTrak is also MCERTS certified for measuring PM10, PM2.5 and both PM10 and PM2.5, respectively.
Renting the TSI Environmental DustTrak Aerosol Monitor
Available for short and long-term rental and with next and same day delivery options, the Environmental DustTrak Aerosol Monitor will arrive ready to go straight out of the box. Once your job is complete, you can either send the equipment back, or contact us to arrange a collection. It’s that simple! Rental equipment will support you during busy periods, offers you an increased work scope and the ability to source equipment with minimum downtime.
Purchasing the TSI Environmental DustTrak
The TSI Environmental DustTrak is also available to purchase from Ashtead Technology. As a Gold Channel Partner for TSI Instruments, we have a dedicated sales and technical team who are on hand to support you throughout your purchase. From product demonstrations to technical queries, they’re here to help you!
Calibrations & Repairs
Ensuring your instruments are calibrated is imperative for accurate air quality monitoring. We take the hassle out of maintaining your TSI Environmental DustTrak by managing calibrations and repairs for you. We’ll remind you when the calibration is due, arrange to have the unit collected, book in a rental replacement (if required), ensure all software / firmware is updated and manage the paperwork.
|Measured Mass Fraction|
|EDTDRX||Simultaneous PMTotal, PM10,PM2.5 and PM1.0|
|Resolution||±0.1% of reading or 0.001 mg/m3, whichever is greater|
|Zero Stability||±0.002 mg/m3 per 24 hours at 10 sec time constant|
|Sample Flow Rate||3.0 L/min (±5% of factory set point, internal flow controlled)|
|Detection Method||Light scattering laser photometer; 90° off-axis detector|
|Gravimetric Sampling||Removable 37mm cartridge (filter media not supplied)|
|Communications||Wireless: Cloud service capability via Netronix Thiamis 820G Quad-Band EGMS GSM/GPRS/HSPA+|
|Wired: USB (host and device) and Ethernet|
|Data Logging||Via Thiamis 820G: user selectable reporting interval from 1 minute to 24 hours (average reading). 4 MB of on-board memory, expandable to 16MB. Stored data accessible using Environet software.1|
|Via internal manual mode: User selectable, 1 second to 1 hour log interval. 5MB of on-board memory (>60,000 data points), 45 days at 1 minute logging interval. Internally stored data accessible using TrakPro Software (supplied).|
|SMS Text Messaging and Email Alert Capability1||User programmable from Environet software|
|Operating Environment||32° to 120°F (0° to 50°C) standard; extended temperature range capability of -4° to 120° F (-20° to 50° C) available with optional enclosure heater2; 0 to 100% RH|
|Environmental Enclosure||Lockable, enclosure; 16 x 12 x 12.25 inches (HWD) (411 x 305 x 311 mm)|
|Sample Inlet||Omni-directional inlet with water trap|
|Power Requirements||Requires AC mains, rechargeable batteries or solar power system3|
|Weight||~ 30 lbs. (13.6 kg)|
|Mounting||Wall and pole mount|