|
|
|
|
|
|
 |
 |
|
Latest Products
As the instrument specialists, we are constantly adding new equipment to our fleet and want you to know about it.
Below you will find the latest additions, all from leading manufacturers.
Just click the relevant sector below or scroll down the page to browse the latest instruments.
This is just a small sample of our latest equipment. For more information, simply call us on +44 (0)845 270 2707 or click HERE to email us.
Environmental Monitoring
RAE Systems UltraRAE 3000 compound specific PID
|
click for a larger image
|
Designed to undertake advanced, compound specific VOC detection and monitoring applications, the new UltraRAE 3000 from RAE Systems is now available from Ashtead Technology to hire, buy or through our Rent To Own (RTO) and Perpetual Rental Plan (PRP).
The UltraRAE 3000has an extended range of 0.05 to 10,000ppm in VOC mode and 50ppb to 200ppm in benzene specific mode, making it ideal instrument for a wide range of applications.
|
| Key Features: |
- Range up to 10,000ppm
- VOC mode or Compound specific modes
- 3 - 60 second response rate
- Integrated RAE correction factors for more than 200 compounds
- Easy to use with large display
- Datalogs up to 6mths at 1min intervals
|
| Applications: |
- Confined space entry pre-screening
- Plant maintenance occupational hygiene monitoring
- Contaminated land investigations and remediation
- Hazardous materials (HAZMAT) response
- Marine spill response
- Refinery down stream monitoring
|
| Technical Specifications: |
| Sensors: |
9.8eV lamp (optional 10.6 & 11.7eV lamps only available by arrangement) |
| Sensor Specifications: |
Gas Monitor |
Range |
Resolution |
Response (T90) |
| VOCs |
0 to 99.99ppm |
0.05ppm |
< 3 secs |
| |
100 to 999.9ppm |
0.1ppm |
< 3 secs |
| |
1000 to 9999ppm |
1ppm |
< 3 secs |
| Benzene |
0 to 200ppm |
0.05ppm |
< 60 secs |
| Butadiene |
0 to 200ppm |
0.05ppm |
< 60 secs |
| Sampling Pump: |
400cc/min flow rate |
| Display: |
VOC ppm by volume, High & Low values, STEL & TWA, Battery, Date and time. |
| Keypad: |
1 operation & 2 programming keys, 1x flashlight on/off button |
| Alarms: |
95dB buzzer + flashing red LED (at user programmable levels) |
| Communication: |
Data download & upload to PC through charging cradle |
| Power: |
Rechargeable Lithium Ion battery |
| IP Rating: |
IP-65 |
| ATEX Rating: |
ATEX II 2G EEx ia IIC T4 |
| Operating Temperature: |
-20°C to 50°C |
| Operating Humidity: |
0 to 95% relative humdity non-condensing |
| Dimensions: |
255 x 76 x 64mm |
| Weight: |
738g |
|
| |
|
|
back to top
Jerome J605 portable Hydrogen Sulphide (H2S) analyser
|
click for a larger image
|
Smaller, lighter, faster and easier to use, the new J605 H2S (Hydrogen Sulphide) portable gas analyser is now available for short and long term hires as well as perpetual rental through our PRP scheme.
New features for the J605 include improved detection limits, increased onboard datalogging, USB port to download data and simplified operation and control menus.
|
| Key Features: |
- Increased H<sub>2</sub>S detection range
- Reduced weight and improved ergonomics
- USB port to download data
- User frinedly operation
|
| Applications: |
- Landfill / Waste site monitoring
- Health & Safety / Regulatory compliance
- HAZMAT & spill response
- Scrubber efficiency testing
|
| Technical Specifications: |
| Sensors: |
Gold film sensor |
| Range: |
3ppb to 10ppb |
| Response Time: |
12 to 27 seconds (range dependant) |
| Accuracy: |
±1 ppb at 5 ppb to ±0.3 ppm at 5.0 ppm |
| Sampling Pump: |
150mLmin-1 |
| Data Port: |
1x USB port |
| Operating Temperature: |
0oC to +40oC |
| Operating Humidity: |
Non-condensing |
| Dimensions: |
280 x 160 x 170mm |
| Weight: |
250g |
|
| |
|
|
back to top
RAE Systems MiniRAE Lite PID
|
click for a larger image
|
Ideal for simpler VOC detection and monitoring applications, the new MiniRAE Lite from RAE Systems is now available from Ashtead Technology to hire, buy or through our Rent To Own (RTO) and Perpetual Rental Plan (PRP).
Featuring the same 10.6eV lamp as the MiniRAE 3000 and a powerful pump able to draw up to 30m, the MiniRAE Lite is simple to use and robust. Potential applications vary from in-house solvents monitoring and environmental site surveys to construction and Spill Response.
|
| Key Features: |
- Range up to 5,000ppm
- 3-second response time
- Humidity compensation
- Loud 95dB and red flashing alarm
- Sampling pump draws up to 30m (vertically & horizontally)
|
| Applications: |
- Environmental monitoring
- Construction
- Health & Safety investigations
- HAZMAT & Spill Response
|
| Technical Specifications: |
| Sensors: |
10.6eV lamp |
| Range: |
0 to 999ppm (0.1 ppm resolution), 1,000 to 5,000ppm (1ppm resolution) |
| Response Time: |
3 seconds |
| Sampling Pump: |
400mLmin-1 |
| Readout: |
Instantaneous: VOC's as ppm by volume, High and Low values, Date and Time |
| Keypad: |
1 operation and 2 programming keys, 1 flashlight on/off |
| Alarms: |
95dB alarm and flashing red LED |
| IP Rating: |
IP-65 |
| Operating Temperature: |
-20oC to +50oC |
| Operating Humidity: |
0 to 95% rh (non-condensing) |
| Dimensions: |
255 x 76 x 64mm |
| Weight: |
738g |
|
| |
|
|
back to top
Crowcon Gas-Tec hydrocarbon gas detector (FID)
|
click for a larger image
|
Now available to hire from Ashtead Technology, the new Gas-Tec portable gas detector from Crowcon is designed to rapidly identify and localise methane leaks from landfill sites and waste processing facilities.
Using Crowcon’s flame ionisation chamber, the Gas-Tec features GPS, data and event logging allowing survey teams to track progress and quickly pinpoint and record areas of significant interest.
|
| Key Features: |
- Range up to 10,000ppm
- GPS logging for accurate location report of leaks
- Full data logging and survey download via USB
- Enhanced electronic controls reduce hydrogen usage
- Simple and intuitive functionality
|
| Applications: |
- Landfill gas leaks
- Waste processing plants
- Bio-energy plants
- Utilities & Construction
- Health & Safety investigations
|
| Technical Specifications: |
| Sensors: |
Flame Ionisation Detection (FID). Calibrated to Methane CH4 (other correction factors available) |
| Range: |
0 to10,000ppm (+/- 10% accuracy) |
| Response Time: |
<2 seconds |
| H2 Cylinder Life: |
400ml = approx 60hrs |
| Display / Controls: |
LCD and soft keys for sequence instruction, operation, set-up and alarms |
| Datalogging: |
5,760 datalogs and 5,760 event logs |
| GPS: |
10m accuracy with 5 satellite lock |
| Alarms: |
Rising tick audible alarm and visual alarm on LCD screen |
| Outputs: |
Headphone, USB and trigger sockets |
| Power: |
Rechargeable Li-Ion battery (22hrs life) |
| IP Rating: |
IP-54 |
| Operating Temperature: |
-5oC to +55oC |
| Operating Humidity: |
20 to 95% rh (non-condensing) |
| Dimensions: |
385 x 205 x 125mm |
| Weight: |
240g |
|
| |
|
|
back to top
Crowcon Eikon Single-Gas Recycleable Personal Monitor
|
click for a larger image
|
Ashtead Technology can now supply the Crowcon Eikon for low cost single-gas personal gas detection. Featuring both visible and audible alarms and a 2 year fixed life, the Eikon provides rugged, maintenance-free continuous monitoring.
Intrinsically Safe (IS as well as dust and water tight to IP65, this personal gas monitor can monitor: Hydrogen Sulphide, Oxygen, Carbon Monoxide, Ammonia, Chlorine or Sulpher Dioxide.
|
| Key Features: |
- Low-cost, reliable personal gas monitoring
- Simple & safe to use (cannot accidently switch-off)
- 2-year fixed life span
- Intrinsically Safe (IS) rated for use in hazardous environments
- IP65 protection for dust and water
- Visible LED and 94dBA audible alarms
|
| Applications: |
- Offshore Oil & Gas
- Refining & Petrochemical Terminals / Depots
- Chemical and Pharmaceutical plants
- Water & Waste Water
- Breweries & Soft Drinks
- Utilities and Bio-Gas plants
- Confined Space Gas Detection
|
| Technical Specifications: |
Measuring Ranges
(& alarm settings): |
|
Range: |
|Alarm: |
| Hydrogen Sulphide |
0 - 50ppm |
5ppm |
| Carbon Monoxide |
0 - 500ppm |
30ppm |
| Oxygen |
0 - 25% w |
19.5% w |
| Ammonia |
0 - 50ppm |
25ppm |
| Chlorine |
0 - 5ppm |
0.5ppm |
| Sulpher Dioxide |
0 - 10ppm |
2ppm |
| Typical Alarm Response: |
5 seconds |
| Alarm: |
94dBA (@ 30cm) and 4x red LEDs |
| Safety Rating: |
Intrinsically Safe (ATEX II 1G EEx ia IIC T4) |
| Environmental Protection: |
IP65 (Dust & Water) |
| Operating Humidity: |
5 to 95% RH non-condensing |
| Operating Temperature: |
-20°C to +50°C |
| Dimensions: |
69 x 63 x 38mm |
| Weight: |
125g |
|
| |
|
|
back to top
Crowcon Tetra:3 Personal 4-Gas Monitor
|
click for a larger image
|
Ashtead Technology's range of Crowcon toxic gas detectors now includes the Tetra:3 for simultaneous detection of Oxygen, Hydrogen Sulphide, Carbon Monoxide and Flammable gases.
Intrinsically Safe (IS) and simple to use with single button operation, the Tetra:3 features an LCD screen, visible and audible alarms and a rechargeable Li-Ion battery giving 16hrs continuous use. Up to 3,000 records can be datalogged on the instrument and downloaded to PC via theR-232 port.
|
| Key Features: |
- Reliable 4- gas monitoring
- Monitors O2, H2S, CO and Flammable gases
- Backlit LCD screen shows gas levels and functions
- Datalogs up to 3,000 records
- Intrinsically Safe (IS) rated for use in hazardous environments
- Visible LED and 94dBA audible alarms
|
| Applications: |
- Offshore Oil & Gas
- Refining & Petrochemical Terminals / Depots
- Chemical and Pharmaceutical plants
- Water & Waste Water
- Breweries & Soft Drinks
- Utilities and Bio-Gas plants
- Confined Space Gas Detection
|
| Technical Specifications: |
Measuring Ranges
(& alarm settings): |
|
Range: |
|Alarm: |
| Oxygen |
0 - 25% |
19 / 23.5% |
| Hydrogen Sulphide |
0 - 100ppm |
5ppm |
| Carbon Monoxide |
0 - 500ppm |
30ppm |
| Flammable |
0 - 100% LEL |
20% LEL |
| Typical Alarm Response: |
10 - 30 seconds (dependant on gas) |
| Display: |
Backlit graphic LCD for simultaneous display of gas levels, battery level, faults, peak readings and TWA |
| Alarm: |
95dBA (@ 30cm), vibrating and flashing red/blue LEDs |
| Datalogging: |
50hrs at 1min intervals (3,000 records) |
| Safety Rating: |
Intrinsically Safe (ATEX II 2G EEx iad IIC T4) |
| Environmental Protection: |
IP65 (Dust & Water) |
| Operating Humidity: |
0 to 99% RH non-condensing |
| Operating Temperature: |
-20°C to +55°C |
| Power: |
Rechargeable Li-Ion battery (16hrs continuous operation) |
| Dimensions: |
69 x 63 x 38mm |
| Weight: |
125g |
|
| |
|
|
back to top
Crowcon Triple Plus + IR Portable Gas Monitor
|
click for a larger image
|
Now available to rent or hire, the Crowcon Triple Plus + IR is an Intriniscally Safe (IS rated), portable monitor for either flammable hydrocarbons or carbon dioxide (CO2) as well as two other gases. Fully datalogging and featuring user selectable visible and audible alarms, the Triple Plus + IR is the ideal solution for a range of applications.
Rugged yet simple to use, this instrument is supplied with Windows software to download data, charger, autocalibrator, earpiece and aspirator probe.
|
| Key Features: |
- Long life infra-red hydrocarbon sensor
- Infra red CO2 sensor
- Simultaneous 4x channel display on LCD
- Datalogs up to 6,000 records per channel
- Intrinsically Safe (IS) to Eex ib d IIC T4
- Visible LED and 85dBA audible alarms
- Simple Windows software interface
|
| Applications: |
- Offshore Oil & Gas
- Refining & Petrochemical Terminals / Depots
- Chemical and Pharmaceutical plants
- Water & Waste Water
- Utilities and Bio-Gas plants
- Confined Space Gas Detection
|
| Technical Specifications: |
Measuring Ranges
(& alarm settings): |
|
Range: |
|Alarm: |
| Flammable Gas |
0 - 100% |
20% LEL |
OR |
|
|
| Carbon Dioxide |
0 - 2% |
0.5% / 1.5% |
plus 2x of the following: |
|
|
| Oxygen |
0 - 25% |
19 / 23.5% |
| Hydrogen Sulphide |
0 - 100ppm |
5ppm |
| Carbon Monoxide |
0 - 500ppm |
30ppm |
| Sulphur Dioxide |
0 - 10ppm |
2ppm |
| Chlorine |
0 - 5ppm |
0.5ppm |
| Ammonia |
0 - 50ppm |
25ppm |
| Typical Alarm Response: |
10 - 20 seconds (dependant on gas) |
| Display: |
Backlit graphic LCD with 2x 24 character lines. Simultaneous display of gas levels, TWA or peak levels, battery, pump, real and elapsed time. |
| Alarm: |
Audible 85dBA (@ 30cm) and flashing red LED |
| Datalogging: |
Adjustable sample rate, 100hrs at 1min intervals (max 6,000 records per channel) with logging of events, user and site |
| Safety Rating: |
Intrinsically Safe (ATEX II 2G EEx ib d IIC T4) |
| Environmental Protection: |
IP65 (Dust & Water) |
| Operating Humidity: |
0 to 99% RH non-condensing |
| Operating Temperature: |
-20°C to +50°C |
| Power: |
Rechargeable sealed lead acid 1.2Ah, ±10hrs continuous operation |
| Dimensions: |
118 x 167 x 73mm |
| Weight: |
900g |
|
| |
|
|
back to top
Crowcon Detective+ IS Transportable Area Gas Monitor
|
click for a larger image
|
Rugged and robust, the new Crowcon Detective+ is the latest area gas monitor to hire, rent or buy from Ashtead Technology. Link multiple instruments to form a protective guard line or use individually to monitor up to four gases simultaneously.
Intrinsically Safe (IS rated), the Detective+
is equipped with infra-red sensor technology, providing either CO2 detection, or allows higher flammable gas level monitoring. The instrument features visible and audible alarms as well datalogging up to 6,000 data points per channel.
|
| Key Features: |
- Up to 4 gases monitored in a rugged and sturdy protective frame
- Ultra-loud 104 dBA sounder and red LED cluster alarms
- Wide range of sensor options including infra-red
- IS rated to ATEX II EEx ib d IIC T4
- Raised detectors & IP65 rating gives excellent sensor protection
- Built-in pump option to provide faster gas response
- 12 Detective+ units may be linked together, up to 100m from adjacent units
|
| Applications: |
- Refining & Petrochemical Terminals / Depots
- Chemical and Pharmaceutical plants
- Contaminated land & site regeneration
- Water & Waste Water
- Utilities and Bio-Gas plants
- Confined Space Gas Detection
|
| Technical Specifications: |
Measuring Ranges
(& alarm settings): |
|
Range: |
|Alarm: |
| Flammable Gas |
0 - 100% |
20% LEL |
OR |
|
|
| Carbon Dioxide |
0 - 2% |
0.5% / 1.5% |
plus 2x of the following: |
|
|
| Oxygen |
0 - 25% |
19 / 23.5% |
| Hydrogen Sulphide |
0 - 100ppm |
5ppm |
| Carbon Monoxide |
0 - 500ppm |
30ppm |
| Sulphur Dioxide |
0 - 10ppm |
2ppm |
| Chlorine |
0 - 5ppm |
0.5ppm |
| Ammonia |
0 - 50ppm |
25ppm |
| Nitrogen Dioxide |
0 - 10ppm |
2ppm |
| Phosphine |
0 - 5ppm |
0.5ppm |
| Hydrogen (non-flamable levels) |
0 - 2,000ppm |
N/A |
| Hydrogen Cyanide |
0 - 25ppm |
10ppm |
| Hydrogen Chloride |
0 - 10ppm |
5ppm |
| Ozone |
0 - 1ppm |
0.3ppm |
| Chlorine Dioxide |
0 - 1ppm |
0.1ppm |
| Hydrogen Fluoride |
0 - 10ppm |
1ppm |
| Ethlylene Oxide |
0 - 10ppm |
5ppm |
| Volatile Organic |
0 -100ppm |
N/A |
| Typical Alarm Response: |
10 - 30 seconds (dependant on gas) |
| Display: |
Backlit graphic LCD with 2x 24 character lines. Simultaneous display of gas levels, TWA or peak levels, battery, pump, real and elapsed time. |
| Alarm: |
Audible 104dBA (@ 1m) siren and flashing red LEDs |
| Datalogging: |
Adjustable sample rate, 100hrs at 1min intervals (max 6,000 records per channel) with logging of events, user and site |
| Menu: |
Operational, Log and Configuration options |
| Safety Rating: |
Intrinsically Safe (ATEX II 2G EEx ib d IIC T4) |
| Environmental Protection: |
IP65 (Dust & Water) |
| Operating Humidity: |
0 to 99% RH non-condensing |
| Operating Temperature: |
-20°C to +40°C |
| Power: |
Rechargeable sealed lead acid 6V 7.2Ah, up to 36hrs continuous operation |
| Dimensions: |
640 x 455 x 455mm |
| Weight: |
7.5Kg |
|
| |
|
|
back to top
TSI 7545 IAQ-Calc IAQ meter
|
click for a larger image
|
The ideal solution for investigating and monitoring indoor air quality (IAQ), the new TSI 7545 IAQ-CALC simultaneously measures and data logs multiple parameters. Measurements are CO, CO2, temperature, humidity; and calculations are dew point, wet bulb temperature, and % outside air.
Supplied with the TSI LogDat2 software, data can be downloaded to computers for on-screen review and report generation. Statistics function displays average, maximum and minimum values, and the number of recorded samples.
|
| Key Features: |
- Simultaneously measures CO, CO2, Temp & Humidity
- Calculates Dew Point, Wet Bulb Temp, absolute Humidity & % Outside Air
- Sampling function records multiple point measurements
- Logs up to 26,900 data points with key (4) measured parameters enabled
- Improved ergonmics and functionality
|
| Applications: |
- Verify building HVAC system performance
- Examine building IAQ conditions to optimize worker productivity
- Comply with regulations and guidelines
|
| Technical Specifications: |
| Carbon Dioxide: |
Sensor: |
Dual Channel NDIR |
| |
Range / Accuracy: |
0 to 5,000ppm / 3% of reading or ±3ppm |
| Carbon Monoxide: |
Sensor: |
Electro-chemical |
| |
Range / Accuracy: |
0 to 500ppm / 3% of reading or ±3ppm |
| Temperature: |
Sensor: |
Thermistor |
| |
Range / Accuracy: |
0°C to +60°C |
| Relative Humidity (RH): |
Sensor: |
Thin-film capacitive |
| |
Range / Accuracy: |
5% to 95% RH / ±3% RH |
| Dew Point: |
Range: |
-15°C to +49°C |
| Wet Bulb Temperature: |
Range: |
+4°C to +60°C |
| % Outside Air: |
Range: |
0 to 100% |
| Power: |
4x AA batteries / Mains AC |
| Operating Temperature: |
+5°C to +45°C |
| Dimensions: |
178 x 190mm |
| Weight: |
270g |
|
| |
|
|
back to top
Remote Visual Inspection
Olympus Iplex LX Industrial Videoscope
|
click for a larger image
|
Combining portability with advanced features, the new Olympus Iplex LX digital videoscope is ideal for inspection applications unsuited to more bulky instruments and is now available from Ashtead Technology to hire, buy or through our Rent To Own (RTO) and Perpetual Rental Plan (PRP).
Lightweight and easy to operate, the Iplex LX is available with a choice of 2 & 3.5m insertion tubes in either 4 0r 6mm diameters. |The rechargeable Lithium battery gives up to 2hrs continuous operation and the handheld control unit provides full control over both operation and image adjustment. Both stills and video (640 x 480pixels) images can recorded to the removeable 1GB USB Flash or output via the USB and Composite Video ports.
|
| Key Features: |
- 2m & 3.5m insertion tubes (4mm & 6mm diameters)
- Record both JPEG stills & MPEG video inspection footage
- Full 4-way tip articulation
- Lightweight & easy to operate
- Instrument control & image manipulation with hand held controller
|
| Applications: |
- Automotive & Aerospace inspections
- Turbine blade inspections
- Generator maintenance
- Pipe & ducting surveys
|
| Technical Specifications: |
| Insertion Tube Diameter: |
Ø4mm & Ø6mm |
| Insertion Tube Length: |
2.0m & 3.5m |
| Field of View: |
120° |
| Depth of Field: |
4 to 190mm |
| Tip Articulation: |
4-way joystick controlled |
| Image Storage: |
Removable 1GB USB Flash drive |
| File Formats: |
JPEG & AVI MPEG |
| Controls: |
Zoom, Brightness, Gain, Freeze Image, Record Still / Video, Articulation Control / Lock, Menu Navigation, Last image recall |
| Display: |
165mm daylight view LCD |
| Outputs: |
1x USB, 1x Composite Video |
| Operating Temperature: |
-10°C to +40°C |
| Power: |
Recahrgeable Li-Ion battery (2hrs operation) / 100V - 240V AC |
| Dimensions: |
255 x 76 x 64mm |
| Weight: |
2.8Kg |
|
| |
|
|
back to top
Non-Destructive Testing
Olympus Epoch 600 Ultrasonic Flaw Detector
|
click for a larger image
|
The new Olympus Epoch 600 is the latest ultrasonic crack and flaw detector available for short o long-term rental as well as purchase from Ashtead Technology. Compact and rugged yet capable of advanced flaw location and measurement, the Epoch 600 is easy to use in almost any inspection environment.
Delivering high quality A-Scan inspections via the large VGA screen and controlled by an intuitive menu system, this instrument delivers a full range of both standard and optional crack and flaw detection features.
|
| Key Features: |
- PerfectSquare™ tuneable square wave pulser
- Digital high dynamic range receiver
- Eight digital filters for enhanced signal-to-noise ratio
- 2kHz PRF for rapid scanning
- Large, full VGA sunlight readable display
- 2GB MicroSD card memory and USB port
|
| Applications: |
- Aerospace
- Automotive
- Civil Engineering
- Manufacturing
- Offshore Oil & Gas
|
| Technical Specifications: |
| Pulser: |
Tuneable Square Wave |
| PRF: |
10Hz to 2,000Hz in 10Hz increments |
| Energy Settings: |
100V, 200V, 300V or 400V |
| Pulse Width: |
Adjustable from 25ns to 5,000ns (0.1mH\)with PerfectSquare™ Technology |
| Receiver Gain: |
0dB to 110dB |
| Maximum Input Signal: |
20 Vp-p |
| Receiver Input Impedence: |
400 Ohms ±5% |
| Receiver Bandwidth: |
0.2mHz to 26.5mHz at -3dB |
| Digital Filter Settings: |
Eight filter sets as standard |
| Rectifications: |
Full-wave, Positive half-wave, Negative half-wave, RF |
| Amplitude Measurement: |
0 to 110% full screen height with 0.25% resolution |
| Measurement Rate: |
Equivalent to PRF in all modes |
| Automated Calibration: |
Velocity, Zero offset, Straight Beam (1st Backwall or Echo-to-Echo), Angle beam (Soundpath or Depth) |
| Test Modes: |
Pulse Echo, Dual or Through Trnasmission |
| Units: |
Millimeters, Inches or Microseconds |
| Range: |
1mm to 10,160mm |
| Velocity: |
635m/s to 15,240m/s |
| Zero Offset: |
0 to 750µs |
| Display Delay: |
-59mm to 25,400mm |
| Refracted Angle: |
0° to 85° in 0.1° increments |
| Measurments: |
Thickness, Soundpath, Projection, Depth, Amplitude, Time-of-Flight, Min/Max Depth, Min/Max Amplitude |
| Alarms: |
Positive and Negative threshold, MInimum Depth |
| Memory: |
50,000 ID onboard memory + removeable 2GB MicroSD card |
| Display: |
640 x 480 pixel transflective colour VGA display with 60Hz update rate |
| Battery: |
Lithium Ion (Li-Ion) rechargeable. ±12hrs operation |
| Mains Power: |
100 to 120VAC, 200 to 240VAC, 50 to 60Hz |
| Transducer Connections: |
BNC or number 1 LEMO |
| Communications: |
USB, RS-232, VGA video-out, Annalgue, Digital |
| IP Rating: |
IP66 |
| Operating Temperature: |
-10°C to +50°C |
| Dimensions: |
236 x 167 x 70mm |
| Weight: |
1.68Kg (including battery) |
|
| |
|
|
back to top
RSL SCUMPI Underwater MPI System
|
click for a larger image
|
Developed by RSL and rented by Ashtead Technology, the SCUMPI System is a completely Self Contained Underwater MPI (SCUMPI) System. Safety features such as the 12 volt lamp and the Electromagnet are carried over from the RSL Umbilical System. The ink bag features an enclosed pump for operation and ink agitation yet can be changed out on site in a couple of minutes.
The system has been specifically developed for work on RIB's or where electrical isolation poses a problem. With a continuous operating time of 5-6 hours and an ink capacity of 9 litres, the SCUMPI System will be capable of performing extended MPI Inspection compared to other non-umbilical methods. The launch frame is made of a lightweight tubular construction, the frame serves two functions. Firstly, keeping the whole system together as a compact module and secondly providing protection for the subsea power pod, ink bag and light during deployment or cross hauling through a structure. The lifting point is Dye Penetrant inspected.
|
| Key Features: |
- Designed for use where electrical isolation is an issue
- Developed from the popular RSL Umbilical System
- 5 - 6 hour continuous operation
- 9L ink capacity (change out in minutes on site)
- Lightwieght rugged frame encloses and protects component
- 4x fully inspected (Dye Penetrant) lifting points
|
| Applications: |
- Underwater Magnetic Particle Inspection (MPI)
- Oil rigs
- Gas platforms
- Pumping Stations
|
| Technical Specifications: |
| Operation: |
On / Off switch |
| SUB_SEA UNIT: |
|
| Housing: |
Anodised Aluminium |
| Operating Time: |
5 - 6hrs continuous |
| Charging Time: |
10hrs |
| INK BAG/PUMP: |
All in one system with the agitation pump located in the sealed Ink Bag. The complete assembly can be changed out in a few minutes. |
| Capacity: |
9 Litres |
| U/V LAMP / INK DISPENSER: |
IP-65 |
| Type: |
LED U/V output |
| Working Voltage: |
12 Volts |
| Light Output: |
Conforms to BS EN ISO 3059 |
| ELECTRO MAGNET: |
|
| Pole Dimensions: |
20mm x 20mm |
| DIMENSIONS / WEIGHTS: |
|
| Launch Frame: |
650mm x 360mm x 260mm / |
| SubSea Unit: |
300mm dia x 260mm height / 15kg (in air), 3kg (in water) |
| Ink Bag / Pump: |
260mm height x 300mm dia / 9kg (full, in air) |
| UV Lamp / Ink Dispenser: |
280mm x 110mm OD / 1.8kg |
| Electro Magnet: |
200mm x 155mm x 50mm / 2.2kg |
|
| |
|
|
back to top
Offshore Products
|
click for a larger image
|
With demand for multibeam echosounders on the increase, Ashtead Technology have recently invested in two new Reson SeaBat 7125 high-resolution multibeam echosounders, valued at £500,000.
Over the years, Reson SeaBat systems have gained world-wide reputation for their capability to provide high-resolution bathymetry and imagery data in real time for extremely detailed 3-D representation of underwater features and seabed conditions.
SeaBat multibeam sonars are designed to meet surveyors need for cost-effective, fast and reliable operation with ultra wide swathe coverage and outstanding submarine data collection even in the most challenging waters.
The new generation SeaBat 7125, available to rent from Ashtead now, builds on the field experience and feedback from many users around the world and brings unparalleled resolution and installation flexibility. Special emphasis has been put on maximizing operational efficiency and features such as variable swath width and roll stabilisation combined with a high ping rate and excellent data quality.
|
| Key Features: |
-
6000m depth rating
-
Up to 512 beams with equi-distant or equi-angle footprints providing extremely high density and maximizing swath width
-
Real-time roll stabilisation maximizing usable swath
-
Dual frequency, 200kHz and 400kHz, provides seamless coverage from 0.5 to 500m range
-
Compliance with IHO SP44Ed5 over entire depth range
-
Advanced diagnostics
-
High ping rate allows high speed operations without compromising data density
|
| |
| |
| Technical Specifications: |
| Frequency |
200 or 400 kHz (dual freq. available) |
| Along-track transmit beamwidth |
2.2o (± 0.5o) at 200 kHz / 1o (± 0.2o) at 400 kHz |
| Across-track receive beamwidth |
1.1o (± 0.05o) at 200 kHz / 0.54o (± 0.03o) at 400 kHz |
| Max ping rate |
50 Hz (± 1 Hz |
| Pulse length |
33 μsec to 300 μsec |
| Number of beams |
256EA*/256ED* at 200kHz
256EA*, 512EA*, 512ED* at 400kHz |
| Max swath angle |
140o |
| Depth Resolution |
6mm |
| Data Output |
Bathymetry, sidescan & snippets
7K data format
Gbit Ethernet |
| Power requirement |
48V DC(±10%)
110W max |
| Transducer cable length |
3m standard |
| LCU to Processor cable length |
25m standard |
| System depth rating |
6000m |
| Temperature operating |
0o to +40o C |
| Temperature storage |
-30o to +55o C |
|
| |
|
|
back to top
|
| |
|
|
|
|
