Surface positioning equipment - Rental & hire
Surface positioning equipment suitable for a range of subsea applications.
Are you looking for surface positioning equipment?
We offer an extensive range of surface positioning equipment for rental and hire. We have a number of systems to suit various subsea application and inspection requirements.
For more information please contact your local office or complete the below form and a member of our team will come back to you.
Surface positioning equipment
Rental & hire
Applanix POS MV OceanMaster
- 0.01° roll and pitch performance
- IN-Fusion 2.0 ensures optimal GNSS aiding for any given conditions
- TrueHeave - no requirement to tune filter for specific conditions, no settling time so no run in time
Applanix POS MV SurfMasterApplanix POS MV SurfMaster
- Up to 0.03° roll and pitch performance
- IN-Fusion 2.0 ensures optimal GNSS aiding for any given conditions
- TrueHeave - no requirement to tune filter for specific conditions, no settling time so no run in time
Applanix POS MV WaveMaster
- Up to 0.02° roll and pitch performance
- IN-Fusion 2.0 ensures optimal GNSS aiding for any given conditions
- TrueHeave - no requirement to tune filter for specific conditions, no settling time so no run in time
Ashtead Technology Taut Wire System (TWS)
- The unit is SIL2 certified and all external sensors are in stainless steel for operation in harsh environments
- The SIEMENS motor on the unit is tropicalised for use in any climate
- The breaking resistor is sized accordingly for continuous use of mooring mode
Coda Octopus F180 SeriesCoda Octopus F180 Series
- Survey grade GNSS, gyro, attitude and heave sensor in one box
- High accuracy position, heading, heave, pitch and roll at up to 100Hz
Hemisphere GNSS Vector V113 GPS CompassHemisphere GNSS Vector V113 GPS Compass
- COAST technology retains position when signal lost
- IMO certified Transmit Heading Device
- Supports NMEA 0183 and NMEA 2000 interfaces
Hemisphere GNSS VS101 GPS CompassHemisphere GNSS VS101 GPS Compass
- Affordable solution delivers 2D GPS heading accuracy better than 0.1 degree rms
- Differential positioning accuracy of less than 60 cm, 95% of the time
Hemisphere GNSS VS111 GPS Compass
- Affordable solution delivers 2D GPS heading accuracy better than 0.1 degree rms
- Differential positioning accuracy of less than 60 cm, 95% of the time
Hemisphere Vector VS131 GNSS Compass
- Enhanced heading performance with GLONASS
- GNSS heading better than 0.04° RMS
- L1 GPS/GLONASS RTK capable
- Additional satellite tracking ensures a robust solution
Kongsberg RADius 1000
- Multiple sensor heads
- Autodetection of transponders
- Measuring and output of range and bearing
- Wide opening angles secure close-by operations
Kongsberg Seatex Seapath 200 System
- 0.02° in documented roll and pitch dynamic accuracy
- No accuracy degradation in roll, pitch and heave measurements during turns
- Robust against GPS dropouts with IMU sensor-based backup
Oceaneering C-Nav 286 Antenna
- Tracks GPS, GLONASS, C-Nav Corrections, and SBAS
- Greater than 90dB out-of-band rejection filter
- Excellent tracking performance and stable phase center
Oceaneering C-Nav 3050
- All-in-view parallel tracking with 66-channels
- Satellite-based augmentation system (SBAS) tracking (WAAS / EGNOS / MSAS / GAGAN)
- Built-in C-NavC1® and C-NavC2® L-Band receiver
Oceaneering C-Nav 7000
- Integrated C-Nav3050® GNSS receiver
- User choice of correction options:
- Public SBAS services (WAAS, EGNOS, MSAS, GAGAN)
Oceaneering C-Nav AD591 Antenna
- Tracks GPS / GLONASS / C-Nav Corrections / SBAS
- Greater than 95dB out of band rejection filter
- Excellent tracking performance and stable phase center
Oceaneering C-Nav Airborne Antenna
- Tracks GPS/GLONASS/C-Nav Corrections/SBAS
- Ideal for airborne and other mobile applications
- Supports government, military, and OEM applications
Oceaneering C-Nav Base Antenna
- Tracks GPS/GLONASS/C-Nav Corrections/SBAS
- Reduces multipath error for RTK corrections
- Excellent tracking performance and stable phase center
Oceaneering C-Nav C-Mariner
- 1 nm/hr navigation quality INS
- GNSS quality parameter driven integration
- 0.05 deg heading accuracy (1 sigma)
Oceaneering C-Nav C-Monitor
- Fully user-configurable
- Complies with National Marine Electronics Association (NMEA) requirements
- Complies to the OGP/IMCA guidelines for GNSS positioning in the oil and gas industry
Oceaneering C-Nav C-NaviGator IIIOceaneering C-Nav C-NaviGator III
- Control and monitor positioning sensors
- Monitor National Marine Electronics Association (NMEA) compliant GPS systems
- Five serial and two USB ports
Oceaneering C-Nav C-Scape
- Blends multiple sensor inputs for unparalleled position QA/QC
- Intuitive and easy to use interface
- 24/7 global customer support
Oceaneering C-Nav C-Tides
- Choice of geoidal or satellite altimetry models
- Real-time filtering or measurement of pitch and roll
- Includes predicted world tides
Oceaneering C-Nav Combiner
- Enables use of separate GNSS and L-band antennas
- Extends high latitude operation
- Bridge or mast mounting
Request more information
Please submit your details and a member of our team will come back to you.