Applied Acoustics Boomer System

Applied Acoustics Boomer System - available for rental, hire and ex-rental purchase from Ashtead Technology.

Applied Acoustics sets a new standards in energy source provision with the market leading CSP range, comes a new generation of Boomer System for a wide variety of sub bottom profiling applications. With cost effective operation, ease of use, technical excellence and strength built into the design and manufacture of the component parts, these systems are able to meet the most demanding of field applications. All of the products are available separately or in combinations that will suit your particular needs. Although ideal for small vessel operations, AAE's Boomer Systems must also be the field operator's choice on the largest research ships. AAE's Boomer Systems are the solution to your sub-bottom profiling needs.

The new generation of Boomer Systems from Applied Acoustic Engineering give you so much more. Light, quiet and compact, the system is based on the market leading energy source, the CSP range. Designed with practicality and durability in mind, the system is extensively field proven and reliable. Easy to deploy and use, it will be the solution to your sub bottom profiling needs.

System comprise's of: Applied Acoustics CSP 300 Portable Power Supply Applied Acoustics CAT 200 Catamran Applied Acoustics AA 200 Boomer Plate

Optionial Processor & Printer

Key features

  • Small Size and weight
  • Repeatable high output pulse
  • Rugged mechanical design

Technical specifications

CSP 300 - Mains Input200-240 VAC. 45-65Hz @ 2.0kVA.3 pin connector. Contains AVIP soft start circuitry to reduce generator requirements
Voltage Output3550 volts DC, 4 pin interlocked connector, semi-conductor discharge method
Output EnergyExternally selectable in increments of 100, 200, 300 and 350 joules
Charging Rate1050J/second for continuous operation at 0 - 50°C ambient or 1500J/second for short duration work
Capacitance48µf, 10 shot life
Trigger#NAME?
Repetition Rate6pps maximum. To 3pps @ 350J
EarthM8 stainless stell stud on front panel
Internal DesignA Modular approach allows for easy servicing and capacitor replacement. (However, for safety reasons, only factory trained technicians shoul
Safety FeaturesMain electronic control circuits and secondary layer of safety circuitry. Specially designed HV connector. High speed dump resistors for hig
AA200 Boomer Plate and CAT200 CatamaranFixing Centres: 31.5cm square
Recommended use100-200J / shot
Maximum energy input300J / shot
Source Level215dB re 1µPa @1m at 200J
Reverberation<1/10 x initial pulse
Connector typeJoy plug male and female
Internal DesignA Modular approach allows for easy servicing and capacitor replacement. (However, for safety reasons, only factory trained technicians shoul
Safety FeaturesMain electronic control circuits and secondary layer of safety circuitry. Specially designed HV connector. High speed dump resistors for hig
AA200 Boomer Plate and CAT200 CatamaranFixing Centres: 31.5cm square
Recommended use100-200J / shot
Maximum energy input300J / shot
Source Level215dB re 1µPa @1m at 200J
Reverberation<1/10 x initial pulse
Connector typeJoy plug male and female

Dimensions

Descriptionmminchkglbs
CSP 300 (H x W x D)177.8 x 482.5 x 508 mm7 x 19" x 20""24 kg52.9 lbs
AA200 Boomer Plate and CAT200 Catamaran380 x 380 x 50 mm15 x 15" x 2""
Weight in air18 kg39.7 lbs
Weight in water10 kg22 lbs