EcoTec TDL-500 - Portable Laser Methane/Gas Analyser

Available as:
  • Rental
  • Sale (ex rental)

EcoTec TDL 500 – Available for rental/hire from Ashtead Technology.

Available for rental/hire, the EcoTec TDL 500 Laser Methane/Gas Analyser is a methane specific gas detector which has a sensitivity of 1ppm and detection range of 0-10,000 ppm.

With ATEX certification, the TDL 500 allows you to precisely determine the location of the methane leaks in a number of environments, including natural gas networks and landfill sites.

Focused on usability, the TDL 500 offers a number of features, including audible and visual alarms, fast responses times (up to 6 seconds depending on the mode) and an 8 hour battery life. Unlike alternative FID units, the TDL-500 also has no need for hydrogen gas supply.

Renting the EcoTec TDL 500
Available on a short or long term basis, the TDL 500 will arrive fully calibrated and ready to go straight out of the box. Once your job is complete, you can either return the equipment to us, or contact us to arrange a collection. It’s that simple!

Key features

  • Detects: Methane (CH4)
  • Sensitivity: 1ppm
  • Detection range: 0-10,000 ppm
  • Response time: 6 seconds
  • Alarm: Visual and audible
  • ATEX Rating: II 2G Ex ib IIA T1 Gb
  • Battery life: Up to 8 hours

Applications

  • Natural gas networks
  • Landfill surface emissions
  • Momentary leaks of methane

Technical specifications

Battery Life- 8 hours at 20°C with all functions on (backlighting, pump on speed 2) - 6 hours at temperatures below 0°C with all functions on (backlight
Battery Charger100 to 240 VAC/ 50-60 Hz battery charger for ATEX battery pack
Charge TimeApproximately 14 hours from complete discharge
Response Time, T90CH4 - 4.5 seconds T10 standards: 2 seconds With suction rod T90: 6 seconds With suction rod T10: < 3.5 seconds
Gases MeasuredCH4 by laser spectroscopy
RangeCH4 - 0-10,000 ppm and 0 ppm to 100% gas volume
Typical AccuracyCH4 detection threshold - 1 ppm
Gas ConnectionQuick connect inlet coupling with locking mechanism: suction rod on right side Quick connect gas outlet coupling
Case SealIP54
ATEXll 2G Ex ib IIB T4
CE94/9/CE directive dated March 23rd 1994
European StandardsConditions for the ATEX 1ppm to 100% gas volume version

Dimensions

Descriptionmminchkglbs
EcoTec TDL 500263 x 113 x 141mm10.3 x 4.4 x 5.5"2.75.9