Tritech Super Seaking DFP Profiler

Available as:
  • Rental
  • Sale (ex rental)

Tritech Super Seaking DFP Profiler – Available for rental, hire and ex-rental purchase from Ashtead Technology.

The Tritech SeaKing suite of sensors comprises of an ever-increasing range of products that are continually being revised. The Super SeaKing Dual Frequency Profiling Sonar Head uses the latest technological advances available in transducer design. Using composite transducer technology this sonar offers substantially increased ranges and image resolution.

Utilising side-lobe suppresion techniques, improved S/N ratios and a reduced beam width the Super SeaKing DFP provides high quality profile data never before available from a mechanical scanning profiler.

Operating at 0.6MHz and 1.1MHz this new profiler had been designed with a hard boot, which offers increased protection over conventional mechanical scanning profilers.

As part of the SeaKing suite of survery sensors the Super SeaKing DFP can be run simultaneously with a number of SeaKing sensors all communicating over one communication link. This offers the obvious financial benefit where only one processor is required to run a number of sensors as well as the simplified logistics of running a suite of sensors over one communication link and operated by one control unit.

Key features

  • 0.6MHz profiler for use in water conaining suspended particles or where longer ranges are required.
  • 1.1MHz profiler for higher accuracy work at short ranges in clearer water.
  • Hard Boot protection
  • Increased Scan rate

Applications

  • Pipeline and trench cross-sectional profiling
  • Precision positioning of matress and rock dumping
  • Storage tank survey
  • Underwater surveying of road and rail bridge foundations

Technical specifications

Operating Frequency600 kHz & 1.1 MHz
Beamwidth2° Conical [600 kHz] 1° Conical[1.1 MHz]
Maximum Range Maximum Range80 m [600 kHz] 40 m [1.1 MHz]
Minimum Range0.3 m
Timing Resolution1mm
Source Level210 dB re 1uPA @ 1 m
Pulse Length20 - 200 microsec
System Bandwidth30 kHz
Scan ModesCombinations of speed and resolution available
Mechanical Step Sizes0.45°,0.9°, 1.35° & 1.8°
Mechanical Resolution0.45°
Scanned SectorVariable to 360°
Continuous 360° mode availableYes
Sector offset mode availableYes
Maximum operational depth4000 m
MaterialsAluminium alloy-HE30, RPU
FinishHard anodised black
Standard ConnectorTritech 6 pin with water-block
TemperatureOperating temperature -10°C to +35°C Storage temperature -20°C to +50°C
Power Requirements18 to 36 VDC @ 10VA
Optional Power Supplies9 to 18 VDC and 36 to 72 VDC @ 10VA
Data Communication Rate156 kBits/sec
Communication RequirementsTwisted pair, modem or coax
DisplaySVGA up to 1280 x 1024 x 256
Range Selection1 to 80 m
GainFull manual and auto controls
Scanned SectorFully variable in direction and width to 360°
Resolution Selection0.45° to 1.8° steps
Head Position and Rotation OffsetsTo 1 mm / 0.09° resolution
Trigger ModeContinuous or Manual
Cursorx-y measurement

Dimensions

Descriptionmminchkglbs
Dimensions (D x L)110 mm x 287 mm4.3 x 11.3""
Weight in air3.5 kg7.7 lbs
Weight in water1.7 kg3.75 lbs