Teledyne TSS DMS-05 – Available for rental, hire and ex-rental purchase from Ashtead Technology.
Accurate motion measurement in all sea conditions
The DMS range of motion sensors is designed specifically for the motion measurement needs of the marine industry. Whether it is achieving IHO standard survey from any size of vessel, or providing safety critical monitoring of offshore platforms, large vessels, helicopter landing decks, cranes and positioning systems, the DMS provides accurate motion measurement in all sea conditions. Incorporating an enhanced external velocity and heading aiding algorithm for improved accuracy during dynamic manoeuvres, the solid state angular rate sensors offer reliability in the highest performing vertical reference units ever produced by TSS.
The DMS-RP sensors meet the requirements of the dynamic positioning industry for accurate vessel roll and pitch measurement. The units provide accurate motion measurement in all sea conditions. Incorporating an enhanced external velocity and heading aiding algorithm for improved accuracy during dynamic manoeuvres, the solid state angular rate sensors offer reliability and a complimentary blending algorithm has proven that the DMS is the highest performance vertical reference unit ever produced by TSS. The DMS-RP sensors are available in Subsea and Surface versions. The sensors can be supplied in various configurations for integration with towed vehicles and other bespoke
applications. As with all TSS systems, the DMS is certified to meet all current and anticipated European legislation for electromagnetic compatibility and electronic emissions.
The DMS-500H heave sensor has been developed to work with a wide range of modern single beam echosounders. With their design allowing acceptance of correction data from the DMS-500H, real-time heave compensation of the sounder data is now achievable. Providing heave data in analogue and digital format, the outputs of the DMS-500H are easily configurable via a simple operator menu. Compact, ruggedised and quick to install, the sensor is supplied
with the cable connector necessary for interfacing and is accompanied by a comprehensive operation manual. In addition to echosounder compensation, the DMS-500H is ideally suited to a wide range of offshore applications including crane and winch control, wave radar and ship motion measurement.
Covered by a comprehensive warranty, the DMS-500H also has free technical telephone support for the total life of the product.
|Heave||5cm or 5% whichever is greater|
|Roll & Pitch (°RMS)||0.05|
|Export Compliance (ECCN)||7A003d|
|Maximum Calibrated Range||Heave ±10m, Roll & Pitch ±30°|
|Data Resolution||Heave 1cm, Roll & Pitch 0.01°|
|Bandwith||Heave 0.05 to >10Hz, Roll & Pitch 0 to >10Hz|
|Digital||Up to 100Hz|
|Analogue||Up to 500Hz (with external repeater)|
|Available Output Parameters||Adjustable data output packet output rate down to 1Hz. Heave, roll pitch, remote heave, angular rate (X,Y,Z); acceleration (X,Y,Z - body frame); angular rate east north up; acceleration east north up (geographical frame); IMU temperature, surve, sway, se|
|Size||99mm (dia) x 172mm (h) excluding connector|